Posted on: May 23, 2022 Posted by: admin Comments: 0

Bathtub stains can come from many sources. They may be caused by oils and skin sheds or minerals in the water supply. It cannot be easy to keep clean. We also have to deal with mold and rust stains. Also, we must be careful not to scratch the tubs’ finish.

There are many finishes for bathtubs, including enamel, acrylic, and porcelain. These tips can safely remove bathtub stains. Porcelain is the most resistant. You can also use the same techniques to remove stains from enamel finishes. Using a slightly different method, it is possible to remove bathtub stains from plastic bathtubs, but it is easy to learn how to clean acrylic bathtub stains.

How to remove stains from an acrylic bathtub

You must understand the capabilities of many household products when cleaning a bathtub. Baking soda, vinegar, hydrogen peroxide, and water is a safe and easy way to clean a bathtub. It is a good idea to clean your bathtub while cleaning it.

  • Use hot water to drain the tub.
  • Sprinkle baking soda generously over the entire tub
  • Spray a 1:1 mixture of distilled vinegar with water on the baking soda.
  • Use a sponge or a brush to mix the solution in the tub.
  • Allow the cleaning solution to sit for 20 minutes.
  • Rinse the tub in hot water, and then check for stains.
  • If the stain is still visible, you can use hydrogen peroxide.
  • Make a paste from one part hydrogen peroxide to two parts baking soda.
  • To scrub stubborn spots, use a sponge with peroxide and baking soda.
  • Allow the paste to work for one hour on the bathtub stains.
  • Rinse the tub with hot water.

How to clean a bathtub with hard water stains

Hard water stains can be daunting when you learn how to clean a bathtub. Some bathtub stains can be stubborn due to calcium, iron, magnesium and other common hard water ingredients. Here are some ways to remove them.

  • Place paper towels over the bathtub stain.
  • Use white vinegar to soak the paper towels.
  • Allow the vinegar to dissolve the stain for approximately two hours.
  • Rinse the tub with hot water, and then check for stains.
  • If the hard water stains remain, you can use baking soda.
  • Use a sponge to remove stains from baking soda and water mixtures
  • Rinse the tub using hot water

How to Remove Rust from Bathtubs

Rusty stains can occur from water with high iron levels, old plumbing or a rusty heater. They can ruin the appearance of your bathtub, no matter how they came about. Here are some ways to clean rust stains from your bathtub.

  • Use hot water to wash the tub.
  • Make a paste with water and baking soda.
  • Use your fingertips to rub the paste into any bathtub stains gently.
  • Allow the paste to work for 20 minutes on the rust stain.
  • Rinse the tub to check for rust.
  • Cut a lemon in half, and squeeze the juice onto any visible stains.
  • Allow the juice to sit for at least 30 mins so that the acid can dissolve the rust.
  • Use a sponge to scrub the stain.
  • Rinse the tub, and repeat the baking soda and lemon juice stain treatment if necessary

How to Clean a Bathtub with an Enamel Finish

You can find cast iron enamel and porcelain tubs in older homes and in more modern remodel. They are durable, easy to maintain, and attractive. They are still susceptible to bathtub staining, so it is important to learn how to get rid of them.

Whether your enamel bathtub is antique or modern, these are some ways to remove stains from enamel bathtubs.

  • Hot water can be used to spray the tub.
  • Use white vinegar to coat the tub.
  • Allow the vinegar to work for 15 minutes on the stain.
  • Sprinkle baking soda over any stain that is still visible.
  • To scrub the stain, use a soft sponge.
  • Rinse the tub in hot water, and then check for stains.
  • If stains remain visible, switch to hydrogen peroxide.
  • Place paper towels on the stain and soak them in hydrogen peroxide.
  • After waiting 20 minutes, remove the paper towels.
  • Rinse the tub using hot water

How to Remove Bathtub Stains from Hard Water

Although porcelain is not porous, the minerals in hard water can build up over time. You will need a magic eraser and white vinegar. A toothbrush is enough. And patience is key.

  • Use a mixture of half water and half vinegar to clean the bathtub.
  • Allow the vinegar to sit for 20 minutes, and then scrub the stain with a toothbrush.
  • Let the water evaporate from the hard water spots with vinegar and wait for 20 minutes.
  • Use a damp magic eraser to remove any stains and swirl it around.
  • Rinse the tub using hot water

 

Leave a Comment